Відео

Thanks for sharing but I don't understand why a push/drag method has to be used when a shielding gas is involved. Doesn't the gas always cover the welding spot regardless of which method is used?

That is not true, I am pushing aluminum welding wire through 10 feet gun with no grafite insert and never problem

I got mine from a buddies dad that was in storage for a while. It has a really hard time cutting even 12 gauge. Consumables are fine and I think air pressure is good. What should I check?

Question: I am seriously thinking about purchasing this product. I would just like to know if it comes with the compressor included or if I need a separate air connection?

Ah yes the classic welding video with no actual welding. Tips and tricks videos are always better.

you would think with an all in one that they'd have more than one gas port on the back,everlast does.

I usually buy 75 / 25, but the last time they gave me 80 / 20, didnt really notice any difference

cool thank you

Will it fit 10lb wire fluxcore

Short, concise, and very informative. Thank you for sharing your knowledge.

Thanks

Can I leave the shield for Flux welding mandatory or I need to remove it??

VERY nice!!! I didnt think you could mig weld stainless and could only use tig. (Im new to welding).

Does anybody have experience welding stainless with this machine ?…I’m trying all the settings it I’m not happy with my results ..

Why didn’t you show the finished weld? Fishy

if switching from 210 to 115. will it still weld thick mild steel? 3/8th steel?

Your poor back. You should build a table or at least extend that one so it’s closer to you. As someone who is 6’2, the least amount of bending over the better

You don’t need a spool gun.

Why can’t I find this kinda helpful short the first time every time… Thank man!

I’m welding 304 1/2 inch rod with a 180C Lincoln with 100% argon. What would u recommend the settings to be at?

Very cool project!!! Love my Hobart welders and Plasma cutters!!

I am guessing it took a torch to get the plastic to make that curve? Whatever you did, it turned out great. Congrats on the entire project!

Quite the project. Looks like it turned out great!

Impressive project! Thanks for doing it with Mig. I know the welder you are using will Tig. It is nice to see someone using mig instead of tigging every thing.

You are blessed my friend. There is a steel supplier in my city. However they don't sell drops. You buy full sized pieces at retail or you don't buy. Only alternative is a scrap yard 3 counties to the east. Never mind there is a huge scrap yard in town. They only sell by the train car load. Bar is looking great. Love old Fords. I would scare up some old head lights. Maybe some turn signals and other lights.

Nice vid. Tell Hobart to bring Sparky back! If you have no idea what I'm talking about, the welder dude on the back of your gloves used to be Hobart's mascot, Sparky. They replaced him with a circle a few years back. Sparky is WAY cooler than a circle. If you go way back you can find him stick welding. I think he switched to mig welding in the 60's. Anyhow give the folks in Appleton the word WE WANT SPARKY BACK!

Cool

Thank you for this video

What spool did you use

What size wire for 1/2 inch

Thanks nice and simple with good info

Great work! Wow!

Can’t even get it to stay welding 😂

You ever try a 90 /10 mix ? I use it and love it on my miller 255

Thanks good tips for this beginner

Straight to the point, clear and precise. Thanks

So no oxygen hole on the bottom?.. sorry I must of missed that part of what

What is THD?

No gas setting info. Should have been mentioned here.

What is the recommended amperage that should be used to weld aluminum? Can a 140 MP tackle something like this or is it only specific types of aluminum thickness?

Thanks currently in school and i wasnt to sure with this.

Nobody with a tractor that old is going to trust a new welder, certainly not one that’s 100lbs lighter than the previous model. Use aluminum windings in this one?

My nozzle is way too hard to change on my 140. I can't even pull it off with my hands, I have to use force with pliers or screwdriver! Any suggestions?

Could this do 1/4" at all?

Que electrodos son compatibles

How good cutting tembaga.use plasma or xcyline

The info is good for beginners. But what’s wrong with the video? It’s incredibly dark. Didn’t anyone notice that? It can be fixed. Not perfectly, but well enough.

Is this something that needs to be done periodically no matter how much use the machine gets? My welder is not feeding properly but I don’t use it all that much.

1:12 😅